Ride Engineering MX-BC000-CA Billet Front Brake Caliper-Silver

Ride Engineering MX-BC000-CA Billet Front Brake Caliper, Silver is made specifically for the bikes listed below.

This product is all about improving the braking performance of modern day dirt bikes. Ride Engineering’s billet caliper achieves this with larger pistons, a solid, flex free body and with cooling fins that allow air to pass completely through. Not only does it increase braking power similar to an over-sized rotor kit, but the feel and modulation on how it applies the pressure to the brake pads is what’s really impressive. Initially the lever feels softer, and with less effort the connection between your finger tips and the front tire is greatly improved. This relationship is so good, that it can be paired up with an over-sized rotor kit to give supercross style stopping power! The caliper is lighter than stock and its performance gains can be fully utilized by riders from novice to pro.

Note: Must be used with an 11mm Front Master Cylinder which comes stock on all the above models. If the caliper hits any part of the stock brake hanger, either file off the obstruction or install a Ride Eng. Brake Hanger bracket)

Fits Honda:

• CR125 (2004-current)
• CR250 (2004-current)
• CRF250 (2004-current)
• CRF450 (2004-current)
• CRF250X (2006-current)
• 450X

Fits Kawasaki:

KX250F (2006-current)
• KX450F (2006-current)
• KLX450R (2007-2011)

Fits Yamaha:

• YZ125/250 (2002-2007)
• YZ450F (2002-2007)
• YZ250F (2002-2006)
• WR250F/450F (2004-2015)

Fits Suzuki:

• RM250Z/450Z (2007-current)